Varavon has opted to list a few select items on sale right now (examples below), that you can save up to 40% OFF. The deals end this month, but keep checking back in case more items are added.
Tag Archives: lcd viewfinder
Kamerar’s QV-1 LCD ViewFinder for the BlackMagic Pocket Cinema Camera BMPCC
It's quickly coming around 2 years since the BlackMagic Pocket Cinema Camera was announced at NAB 2013, but with the recent firmware upgrades and lack of competition for a pocketable camera that is capable of RAW video for under $1K, it's still a very popular choice. Better late than never, Kamerar has finally decided to release a dedicated LCD ViewFinder for the BMPCC Camera.
Similar to previous QV-1 versions, the LCD ViewFinder attaches magnetically to a special baseplate that is a similar width to a Manfrotto 701PL plate. The QV-1 LCD VIEW FINDER FOR BMPCC, folds up to see an entire view of the BMPCC screen without crops or obstruction and full access to menu buttons.
The Dovetail quick release plate does not obstruct the battery door, and offers both a 3/8" and 1/4" female thread for you to add virtually any other type of QR plate or direct tripod mount.
The Kamerar QV-1 LCD View Finder for the BlackMagic Pocket Cinema Camera #BMPCC is available now, and more information can be found at https://PNCGear.com (click here).
QV-1 LCD VIEW FINDER FOR BMPCC
Simple 3″ LCD Sunshade Hood
Just a few days ago I pointed out the Vello LCD Sunshade for articulating LCDs. A few comments pointed out that they were looking for a simple hood that attaches to a Zacuto frame. I'm guessing because they don't have a swing out LCD that the Vello can attach to. Today I run into this other simple LCD hood / shade on eBay that can attach to both 3" swing out LCDs or to standard rear LCD monitors.
As simple as these things are, if you've even had to cover your LCD with your hand, you'll know how helpful it can be to help set color and exposure in the bright sun. It attaches over the DSLR body through bungee straps which doesn't look overly complicated for you to DIY. Some firm cardboard, a bit of cloth (heck even duct tape), and a stretchy garter should be enough to make your own version for any size LCD. You can see more images of how they have it put together at the product page (Click here).
3" DSLR Video Camera LCD Video Sunshade Hood
Magnifty LCD Magnifier
Here's a product some of you might find interesting, although I have to admit it's probably not too far off for DIY makers to craft up their own version. The Magnifty is a large Magnifier attached on 15mm rails magnifies the image on your LCD to help you get better focus. Other products like the Cinevate Cyclops or the Jag35 MonitorX offer the same method of magnifying the image into a large view, but attach directly to the camera's LCD.
Cinevate Cyclops and Jag35 MonitorX
The Magnifty uses 15mm rods to slide forward or back to adjust the magnification, and also offers a much larger view. One major benefit to using such analogue techniques is that you know you're getting the proper exposure and color from the camera's LCD than you would with most cheaper electronic Monitors. Of course if you work indoors, you don't have to think twice about it, but for outdoor use you should be cautious of your equipment. Check out the Magnifty at their eBay store following the link (click here).
Magnifty LCD Viewfinder Magnifier 15mm Mount
Sony NEX-7 Screen Protector and LCD ViewFinder
Finally had time to add the Lexerd LCD screen protector on the Sony NEX-7. The Lexerd is a thin film screen protector, much like you would use on your iPhone. Easy to apply, comes with all the right tools. There are other hard plastic screen protectors, but some may introduce more glare. The thin film type works for me on this camera.
Afterwards, I decided to install a cheap 16x9 LCD Loupe for those bright days when I want to pixel peep and review my photos or video. There aren't very many options for viewfinders to fit the very wide 16x9 LCD of the Sony NEX-7, so I just grabbed a cheap one on eBay which works well to block out any light and to magnify the screen. This one fits perfectly without cropping any of the view. It might not be the best on the market, but it beats trying to cover the LCD with my hand.
NEX-7 16x9 Wide Screen LCD ViewFinder
Varavon Loupe EX Solo – LCD Viewfinder Review
Here's a better look at Varavon's latest Loupe Viewfinder. This one has a 180 degree flip up loupe that will provide you shade from the sun, even when you don't need a magnifier. The lens is glass and has a diopter to adjust for vision imperfections. Solid build with metal mounting brackets that can be positioned to fit a variety of cameras. The bottom thumb knob is all metal with a large base so that you can position a quick release plate underneath without wobbling.
If you choose to use the Loupe EX with a Swivel LCD camera extended (i.e. GH2 / 60D), they also sell a bracket for this to safely support the LCD from over extending.
The view finder is a solid choice amongst some of the other high end brand names, and is available for Canon, Nikon, and Panasonic GH1/GH2 cameras. Varavon also makes DSLR sliders, Cages, Video rigs, and other viewfinders. I'm extremely fond of their cage. Simple, ergonomical, functional, and lightweight. You can find more of those Varavon products available at B&H (click here).
Varavon Products - View Finders, Cages, Sliders, Rigs
And I didn't know it was available, but apparently they have almost all of their products on Amazon too (click here)
Zacuto EVF with AfterMarket View Finder(s)
Zacuto's got one of the sweetest EVFs (electronic viewfinders) available on the market. You could buy the 3" HDMI EVF alone which will save you a few hundred dollars, but of course, what good is the EVF if you don't have the Z-Finder Loupe to match? Having to invest in a Z-Finder loupe will run the bill up several more hundreds of dollars. According to Cheesycam reader Ray, another popular ViewFinder works fine.
Many people who couldn't afford the real Z-Finder opted in for the Seagull. If you already own the Seagull ViewFinder, they fit perfectly onto Zacuto Frames. One benefit from this clever tip is that you could buy these Z-FRM frames for about $5.00 dollars to use as as spare frames with your Seagull, or if you need to add a frame to another camera. Another benefit of course is that it should mount directly to Zacuto's HDMI EVF either 'Snap' or 'Flip' versions, saving you a few hundred dollars. I'm pretty sure the more popular VF Prime DSLR LCD falls into this same category too. [Thanks Ray]
You can find these view finders under a few different names like 'VF Prime' or Seagull View Finder. Can be found on eBay here: (click here)
Or also Available on Amazon here:
VF Prime DSLR Camera LCD Viewfinder for 3" LCD
Canon 60D T3i LCD ViewFinder – No Sticky
A look at how the latest version CarrySpeed VFinder attaches to a Canon 60D with that swivel out screen. Right off the bat the metal frames might not line up perfectly, but they are easy to bend into position. If you want something super secure, I say permanently glue the sucker to the metal QR frame.
The 3:2 viewfinder fits perfectly on this Canon 60D and it is slightly slotted to fit the Canon T3i as well. The CarrySpeed viewfinders come with a Neoprene pouch, a Lanyard, Metal Frame, and the VFinder loupe. Not a bad deal for an important tool to help you set focus and dial in proper exposure (especially on those bright days). You might want to add some Anti Fog solution too.
Canon 60D / Canon T3i LCD ViewFinder Quick Frame
[Update] Also available via Amazon below
CarrySpeed LCD ViewFinder
New Canon 60D / T3i LCD ViewFinder Frame
LCD View Finder for Canon T2i, 5D Mark II, 7D and other 3" LCD's
In order to save your swing out LCD on your Canon 60D or T3i, CarrySpeed looks to have added a new metal frame that doesn't stick to the glass. This new version attaches under the camera at the tripod mount, but still keeps one available in case you need to go to monopod / tripod mode. A nice touch for those who have problems with the metal sticky falling off, or for those who still want to flip the LCD back into the DSLR body for protection.
Heck, why not just permanently glue that sucker onto the Metal frame? You'll have a solid LCD ViewFinder for sure, and with a twist of a knob, it's off when you need it off. Oh and there's a pretty hefty price drop going on..
LCD View Finder for Canon T2i, 5D Mark II, 7D and other 3" LCD's
Also Available via Amazon
New LCD View Finder for Canon T2i, 5D Mark II, 7D and other 3″ LCD’s