Vimeo member LJ Lee gives us a look at the new Lanparte Shoulder pad that integrates a quick release camera mounting baseplate [Thanks LJ]. The design is drilled out to shave off some weight and allows you to carry the camera over the shoulder instead of further out over your arms. Essentially you'll have a more balanced and stable rig, but you have to configure this to use an EVF or LCD monitor. You can already find the new Lanparte shoulder pad via eBay (Click Here).
Lanparte New Shoulder Pad Quick Release Camera Baseplate
Missed the 160 LED video light bundle? Apparently LinkDelight is slashing prices on a number of items including two different 15mm Rails with quick release camera mount and tripod base plate. [Thanks Viktor]
One of these sets looks like a part found from a Fotga rig. If you just need to get started with a simple set to support a basic follow focus or to mount other 15mm accessories, check out the two different sets following the link (click here)
Link Delight 15mm Base Rails Tripod Mount Quick Release
Also noted in the comments, they are practically throwing away their DSLR Follow Focus systems at 42% off. The LED light bundle sold out in minutes, so I don't expect these prices to last.
[Update] Just a note, that this is 'NOT' an 'Official' Fancier sponsored product. Those guys never provided a QR solution, so it was about time we made a few available. This is a custom QR adapter made from P&C and there's a limited inventory. This 'DOES NOT' include a quick release plate. This is only the adapter base itself. This base adapter will allow you to quickly mount your camera from your WF717 Fluid Head to a DSLR Cage, Crane, Slider, Shoulder Rig, Steadicam, etc.
It has a very flush base that will work perfectly on a Glidecam or Flycam and you can tighten the knob without interference. It also 'mounts' and 'dismounts' from the top instead of sliding into the base. This makes it easier to mount shoulder rigs that have hanging handles, or low mounted counterweights that often make sliding the QR plate difficult.
This mini black 323 replica made mostly of Aluminum-alloy could be a cheap solution for getting your cameras in and out of cages, jibs, sliders, etc. [Thanks Ed]. The adapter specs state it has a 3/8" threaded hole, but can be stepped down using a 3/8-1/4 reducer bushing.
Just FYI, if you haven't been able to get your hands on a Manfrotto Compatible Quick Release adapter, they are back in stock. They are perfect if you have the need to quickly move your camera from a Manfrotto tripod, over to another rig like a Slider, or Crane.
The $24.00 dollar shoulder support with Rod mounts are getting a few questions as well as the recent Quick Release adapter posted on this blog. Here's a look at how i'm using these recently purchased items with my gear.
First a quick look at the cheap Quick Release adapter. It's not a standard QR adapter with a 1/4x20 thread already tapped in. Instead I run a beveled screw through the top of the adapter and place a bolt underneath. To keep the quick release adapter from shifting around I also used thin double sided tape between the adapter and the stage of the flycam nano. To prevent the nut from coming loose, I also have a washer + lock washer.
Second common question i've been getting is how to mount rods to the cheap $24 dollar shoulder support. To get the basic foundation setup, you'll need an adapter plate. This type of plate is commonly used under a rod rig so that it can be placed on top of a Tripod of Fluid head. When purchasing a basic set of rods or any rig, find out if one will be provided. If not you can buy one separately here: https://express35.com/tripod-mount/1054/
After mounting the adapter plate to the shoulder support, I can then position any set of handles, build up an offset stage, have support for a follow focus, matte box, etc. You can also find a basic set of rails with DSLR base plate, and Tripod plate here: https://express35.com/rail-system/295/
Gini Rig on $24 Shoulder Support w/ Varavon ViewFinder