I thought i'd test out how well I have things balanced out with the GH4 and Rokinon 7.5mm Fisheye Lens. A few notes - the Rokinon lens is a manual lens with no image stabilization and although parts of this video have been sped up, there is absolutely no image stabilization applied. I'm also holding the gimbal only by it's Top handle. As I reach speeds up to 20mph there is plenty of wind resistance. Considering these factors - I think it faired well.
Tag Archives: electric skateboard
BlackMagic Design Cinema Camera on (Unbalanced) 3 Axis Stabilizer Gimbal
A few weeks ago, I had a comment-chat if a BMCC can fly on a CAME 5000 gimbal. So four of us guys spent over half an hour trying to stuff the BlackMagic Design Cinema Camera into this CAME 5000 Gimbal, but clearly it was not meant to work. The BMCC is just too wide from the center mount, and to compensate we tried adding a quick release plate sideways. After failing, we decided to give it a run with an unbalanced setup. Here are the results.
Surprisingly the horizon stayed just about perfectly level the entire time, but you can see how it struggled with the panning stabilization. Of course if I really wanted to, I can add post stabilization to the footage and it may not be so noticeable. Had I disabled the pan stabilization, I think this would have been a perfectly acceptable run. On lighter camera setups like the GH3, the results have been very good, but I can't suggest the CAME 5000 3 Axis Gimbal with anything more than an average DSLR.
More Fun with Palo Alto Adapter
This time I took my Canon S100 out on a few different Painter Poles with the Palo Alto adapter. One pole is around 16' fully extended, and then I wanted to test out my 30' (30 feet) Unger Pole. These are video examples, but ideally it would be best suited for still photography.
There's some additional information about the Palo Alto adapters in my previous article: http://cheesycam.com/pc-palo-alto-adapter-available/. In the video below i'm using my Unger 9'-30' Telescoping Pole found here: https://goo.gl/m5Ha8. There is also no image stabilization done in post, so you can imagine the improvement if I had.
The Palo Alto adapter was something I wanted to make for my own hobbies, but ended up making a small quantity available which sold out in a single day. The next small batch wasn't available until 9 months later (just last week) and again sold out in less than three days. It's such a niche market, that we are still only running them off in small quantities, but they should be available again, so check it out to see if it's something you'd be interested in playing with. You can find the Palo Alto adapters available at https://PhotographyandCinema.com (click here).
Palo Alto Paint Pole Adapter from PhotographyandCinema.com
Practice Run Electric SkateBoard + HX9
Another practice run on the Electric Skateboard. I'm determined to learn how to ride this thing, and I think I'm getting pretty comfortable. I picked up quickly for someone who never really knew how to skate. I had to warm up a 21 year old car and decided it would be fun to chase it around. Surprisingly this car still gets her 35+ MPG and passed the smog so clean, the Smog techs were in awe. Keep in mind i'm still not shooting with a Video camera Stabilizer, this is all with a short Velbon UltraStick monopod and the Sony HX9 point and shoot camera. The full 1080/60p helps with these moving shots. I'm almost pretty comfortable to take out my Steadicam Vest and Glidecam setup, so that should yield much better results.