DIY Equipment

• 8 Comments

•

Constantly poking around for a good set of lenses for the Sony NEX-7, this eBay seller takes old vintage lenses and modifies them to fit (without adapter) to most Micro Four Thirds, Sony NEX (e-mount), and Leica cameras. That's right, no adapters needed. He seems to always have some interesting modifications for these small sensor cameras including modifying a Canon 50mm F/0.95 and a 55mm F/1.0 lens for the Sony NEX. If you're looking for a good set of cheap portrait lenses for your small sensor cameras, check out his constantly updated auctions (click here).

sony-nex-55mmnex-50mm-f095
find-price-button Jieying Modded Lens Sony GH2 Leica

• 10 Comments

•

I get it. Sometimes you fly a stabilizer around and need to take a pause for a long static shot. These things can get quite heavy, so being able to stand on it's own could be beneficial for event shooters. Varizoom offers a Monopod / Stabilizer called the FlowPod (seen here), but when used as a stabilizer, it didn't really work out very well. Varizoom also makes a Crossfire Stabilizer (seen here) that doubles as a small Tripod too. None of them I think work very well, mainly because of the Gimbal setup they are using.

Varizoom-FlowPod
find-price-button
Varizoom FlowPod Stabilizer Monopod 		Varizoom-Crossfire
find-price-button
Varizoom Crossfire Stabilizer Tripod

Wondlan also recently showed a Carbon Stabilizer that can be extended to work as a monopod, and they used a better Gimbal system like the Glidecam type stabilizers. I think they fell short a bit here because the sled was a little too small. If you think you need a stabilizer that doubles as a stand, here YouTube member NitsanPictures shows how it could be possible to modify your own with a Glidecam, and possibly even the Flycam by connecting to the 1/4" female thread under the post. It seems to work pretty good, but I think there are other Monopod designs that would make it easier to telescope when needed. [Thanks Nitsan] If you guys haven't seen a Glidecam Stabilizer in use, check out some of my old videos.

Glidecam HD1000 Demo:
HD1000 Demo

Glidecam HD4000 Demo:
HD4000 Glidecam Demo

Glidecam-HD1000-HD2000-HD4000
find-price-button Glidecam HD1000 HD2000 HD4000 Stabilizers

• 28 Comments

•

500 LED light XLR adapter 12V batteryXLR battery 500 LED Light

I still get questions about affordable LED light panels, and these 500 LEDs are still a good option. The only problem is that the cheaper versions were never offered with a battery power solution, so they can be used off-the-grid on location. That's a huge part most people consider when shopping for LED lighting. Some of these 500 LED light panels (above) use an XLR DC power adapter that connects to AC (wall outlet). So it is very possible to run them from a battery, but the trick is finding the correct XLR DC power adapter cable.

If you didn't catch it in one of the comments, Derek shared that the Jag35 XLR cable is indeed a good fit. He was able to power through the XLR using a simple Canon LP-E6 battery (for about 30 minutes). Of course once you have the proper cable, there's no reason you couldn't use a coupler + Tekkeon Battery pack to give you much longer portable run time. Much like the Tekkeon + Coupler setup I used to power a camera. Just make sure that your LED light has the XLR input as seen in the back (above).


Jag35-XLR-Cable
find-price-button Jag35 XLR Power Adapter cable

These lights were once very popular, but haven't been since the release of the newer 600/900/1200 LED panels, so you'll often find these older 500s on auction with low starting and no reserve pricing (click here).

500 LED light XLR adapter 12V battery
find-price-button 500 LED Dimmable Video Light Panels

• 62 Comments

•

Cheesycam-DIY-Crane-Jib (1)Cheesycam-DIY-Crane-Jib (2)

So after the prototype DIY Jib Brackets touched down in the studio, I visited my local hardware store (Representing Orchard Hardware Supply, you know WestSide! Throwin' up the 'W'). Anyways, that's what my shopping cart looked like with plain super lightweight AL square tubing on the left, and perforated square tubing to the right. The AL is 1" and 3/4" square tubes. On the right is 1.25" + 1" perforated tube which is easier to work with - no drilling required. Perforated tubes are not in every hardware store, but they are also not difficult to track down if you call your local Metal Market. You can see some of these on Amazon (seen here). With one tube larger than the other, you can create a telescoping jib. This of course is not necessary, you can just use one solid piece for both top and bottom. My top tube is 4ft. long and the bottom is 3ft. long.

These Prototype brackets were designed with Steel. Heavy duty stuff, and once all the parts are assembled, the structural integrity is solid. With this design, we were able to eliminate the requirement for welded parts, which is time consuming and costly for manufacturing jibs. Being able to offer just the brackets also saves the end user from shipping costs due to weight and length of packaging. Once you get your hands on these brackets (if the idea ever flies), then it literally takes a few minutes of assembly with basic nuts and bolts and you'll be flying whatever size crane you can think of. A goal was to offer the complete set of brackets, nuts, bolts, nylon bearings, lock nuts, etc. for around $15 bucks. Will it happen? Don't know, but it sure is fun playing with ideas....

• 45 Comments

•

Sometimes I have the craziest ideas, and they don't always pan out very well. Here's one i'm quite excited about, but i'm not sure how others would feel. For the past few months i've had the idea of working on a 'DIY Crane Kit'. I went through the process of building a few Jibs myself and found that while you can save quite a bit of money, the hardest part to tackle is the mounting brackets.

Cheesycam-DIY-Jib-Kit

So after a few designs, I've been working on a cost effective way to have special Jib brackets made that will allow you to make your own cranes / jibs. These brackets will be made from solid steel (very strong and durable), and will be perfectly aligned for smooth crane operation and modular so you can build your cranes to various lengths.

It will be so easy to assemble that today you could have a very small 4ft crane for an indoor shoot, and tomorrow you could have and 8ft., 9ft.,12ft. crane. There's also stuff i've been working on to show you guys how to make telescoping cranes with all off the shelf parts. Who knows what configurations people will have, and once you see these brackets, it will make more sense. I'm not going to go too much into details, but what you see in the box (above) will be pretty much all you'll need to get your DIY Jib started along with a set of instructions (and a video to follow). Oh and of course it will look very professional. Let me know what you guys think? Good idea or not?

• 27 Comments

•

It was only a couple of weeks ago I posted information on how to modify a Steadicam Smoothee, essentially making it a mini Steadicam Merlin stabilizer (a.k.a Baby Merlin). If you have a small camera, and you're a fan of the Merlin steadicam, this mod will come in at about 1/5th the price. In the past few days i've received some comments about successful modifications and am just waiting to see some of those results.

Today I just happened upon Vimeo member dhardjono with a recent video posted showing a modified Steadicam Smoothee and a GH2 camera. I happened upon it, because i've been wanting to get a certain lens for a while, and in this video the Rokinon 7.5mm Fisheye (found here) was used on the GH2. Results are pretty impressive already removing harsh vibrations and quick jerking movements, but i'm sure with more practice, the results will be solid. If you want to build your own, I have my article posted here: http://cheesycam.com/diy-steadicam-smoothee-mod-cheesycam-baby-merlin/

The Steadicam Smoothee stabilizer is currently on sale until the end of the month following the link (click here).

GoPro-Steadicam-Smoothee-DIY-Steadicam
find-price-button Steadicam Smoothee for GoPro and iPhone

• 18 Comments

•

Nikon-50mm-E-Series-Lens-Adapter

I originally picked up this Nikon 50mm F/1.8 E Series Pancake lens for use with the new Sony NEX-7, but I thought I would remind others that are just starting out in DSLR video, that these very inexpensive lenses can be used with your Canon DSLR cameras as well.

image-4image

One of the first lenses most people suggest to others (if they are strapped on budget) is the Canon 50mm F/1.8 (found here). It's a fast and sharp prime lens that runs around $120 dollars, and the images will blow away the basic 18-55mm kit lens. The main complaint on this lens is the plastic build quality. If you don't require the autofocus feature, you can shop for older manual lenses which are better built with a smoother focus ring for video.

image-1image-2

Lately i've been seeing a trend with inflating prices on older lenses. I'm constantly being outbid on many of the faster (vintage) prime lenses. Today, there are more mirrorless type cameras that can use these lenses, and more lens adapters available to mate the older Minolta, Pentax, Nikon, Canon, etc. lenses. If you have any collected from an old stash, keep them close. They have more value today, than they did just a few years ago.

Canon5DMarkII-Nikon-50mm
Canon 5D Mark II + Nikon 50mm F/1.8 E Series Lens

If you're just starting out, these Nikon 50mm F/1.8 pancake lenses may not be the sharpest of older manual lenses, but I like the compact size, wide aperture, and the out of focus backgrounds. You can find many of them still for under $75 dollars (click here).

Nikon-50mm-E-Series
find-price-button Nikon 50mm F/1.8 E Series Manual Aperture Manual Focus Lens

Nikon-to-EOS-Adapter
find-price-button Nikon Lens to Canon EOS Adapter

• 9 Comments

•

1200_led21200_led6

Duane assembles a 1200 LED Light panel made from the super cheap flexible LED strips found in an earlier article (here). This is the first build out of two he'll be using to throw some light onto the backdrop, and he mentions he's pretty happy with his build and results. 4 different switches in the assembly allow for different light output settings by turning a portion of the light on or off. He's added a 12V converter, but the LED lights themselves only require 12V, so it's possible to modify a setup like this and go mobile.

1200_led11200_led4

If you're looking to assembling your own LED light using these LED strips, you can find a bit more information (here). A few more details about the items used in Duane's DIY LED light build used below. [Thanks Duane]

- x4 5m Led strips (1200 leds)
- x4 switches that allows me to switch 25% of the lights on at a time.
- x1 100 watt 12v power supply
- x1 florescent light housing from Lowe's (gutted)
- x1 light stand (already had)
- x2 conduit brackets to brace into the stand
All for under $100 bucks (just under)

• 1 Comment

•

Aron Anderson of YouTube channel TrinityFXmg, is a big fan of shooting video on the iPhone. In this recent episode he manages to assemble some common spare parts into a folding stabilizer. I've touched on the Shoulder Brace and the Folding Flash Bracket earlier in this blog, but never together in this type of setup. Some foam over the handles could even finish this look off to where you wouldn't recognize it's original intention. Great tip on this inexpensive items even if you're not a fan of the iPhone, a stabilizer like this can be used for smaller cameras like Sony NEX-7. [Thanks Aron].

manfrotto-361-shoulder-brace
find-price-button Chest Shoulder Monopod Brace

Folding-Flash-Bracket
find-price-button Dual Folding Flash Bracket Locking