Konova Roller Bearing DSLR Slider – Review

Ok, I have to keep adding 'Roller bearing' to the description of this DSLR slider. Everyone keeps throwing in names like Igus and GlideTrack, but it's not the same. Those guys don't use actual 'Roller bearings'. I know all about the Igus based sliders, and you can find my version on this blog. My current fixation is about this particular 'Rolling Bearing' slider. If you've ever tried an actual roller bearing slider, you might not go back. The problem is that even the cheapest Roller bearing slider will run you close to $500 bucks. This is why I was excited to see something a lot cheaper show up online.

budget-slider (1 of 5)budget-slider (4 of 5)

So here it is, and what do you need to know? For starters, it's a great deal. Even after posting this slider up, I haven't seen anything else that can come close to this as far as features, build quality, and price. I'm sure i'm going to start getting some 'I made mine for this price...' comments, but unless you're selling it, i'm not considering it as a readily available option.

This slider has a solid rail, no flex. It has 1/4x20 & 3/8" threaded tripod mounts in the center, and on each end. It also has 1/4 x 20 & 3/8" threaded mounts on the sides for 'vertical' mounting. It comes with adjustable legs/feet that can be removed. There's also padded platforms that allow it to be used directly on any surface without worry of scratching or marking the area. There's a brake to lock down the carrier when it's not in use. It also comes with a very slick looking quality travel bag. The Slider moves very fluid with zero lash and can be adjusted if need be. It's also very lightweight, but feels like it can slide even heavier cameras than a DSLR.

budget-slider (2 of 5)budget-slider (3 of 5)

There is one thing to note. The platform is designed only for a 3/8" mount. This means you need a fluid head or some type of camera mount. You can't mount the camera directly to the platform. Not a deal breaker since most sliders require this anyway. The unit slides so easily, it would work perfectly for motion timelapse rigs. Any small motor can easily pull a heavy camera through it's entire rail. Overall it's more than I expected for the price. The first actual 'roller bearing' slider to break this price point, and here it is.

So another great cost saving product first introduced here on Cheesycam.com. If you want to show some support for what I do, hook a brotha up and link back to this article!

find-price-button Konova DSLR Video Camera Slider

Konova Slider - via Amazon

find-price-button KONOVA K Slider 3080 NA-8

69 thoughts on “Konova Roller Bearing DSLR Slider – Review

  1. Just updating my previous post. I got the slider (from B&H Video in NY but also available with cheaper shipping at filmtools.com) and it's not as smooth as I had hoped. I don't know if I need to use some lubrication thing on it to make it slider more or not.
    It's smooth enough but could be better. If I tilt the slider on a slant, the sliding part doesn't fly down which is what I would've loved.

    Still worth it though

  2. I'm from Canada and I'm looking to buy the Dot Line DLC 47" Camera Slider from B&H in NY and its at $150 so way cheaper and still does the job.

  3. Great job with your site. Very useful. Tried clicking on the link but it came up error. I've seen these but they're always way to expensive. I'm considering this one.


  4. Does anyone know what brand the rail or carriage is? Or if there is any writing on the rubber wipers? I love the Konova slider, but it's waaaay too long for my needs... I was hoping to make a mini version that's like 12" long.

    Thanks for any help!

  5. Emm

    Post author

    @Paul - That two timing slider! I thought I was the only one sleeping with her...LOL.

  6. Just got my Konova Slider in today. Wow, took only 5 days to ship! Now that is FAST!! Immediately out of the box, It was already smooth, and not wobbly like some people were mentioning up above. WAAAAAAY better than my DIY IGUS slider. I knew they made different lengths, but for some reason I thought the default length was 100mm. How well, having a compact slider of this size will make it that much easier for run and gun anyways (weddings, events etc.) I figured if I needed to dolly anymore than a couple feet, I would be better off using an actual dolly system. Thanks again Emm for the kick ass Konova recommendation!!!

  7. Not sure if anyone mentioned it-- but I emailed Frank about roughness in my slider. He sent me instructions (albeit in Korean) about how to remove the carriage and adjust the position of the bearings for best contact with the rail. Emm, I'll email it to you if you're interested in posting it.

  8. Just got the slider today. The bearing plate is extremely wobbly. It looks like I got the four bearing model. I tried tightening and loosening, but it makes no change.

    Anybody else with an issue like this? I did contact Frank. Just waiting to hear a response.

  9. Brett

    There is one thing that confuses me about mounting the slider vertically on the tripod to do a full vertical slide. What is stopping the camera from simply rolling down the full length of the rail? In other words; can you control the resistance of the slide and if so how well does this work in achieving a smooth and constant slide in the vertical direction?

  10. entienne01

    I'm messing around with the feet and trying to figure out a way to keep them attached and fit in the bag for transportation.

    I want to add some height in between the base of the feet and the slider (where it attaches), maybe with some rubber stoppers. That way, it'll clear the endplates when I twist the feet to align it with the slider for transportation.

    But this set up will still be too long to fit in the bag. So I'm thinking of drilling an additional set of holes a little closer to center so that when I turn the feet, it'll line up with the ends of the slider and fit perfectly in the bag. Now I just have to find a local machinist?

  11. Harlan

    @entienne01 Thanks so much brother. I purchased the longest one too so any tips and suggestions are much appreciated!

  12. entienne01

    Also, I purchased the longest version of the slider and you'll definitely need to mount it to two tripods to keep it it from leaning.

  13. entienne01

    Got my slider today!!! Says it was shipped on Friday which means it only took 3 days? I purchased it a little over a week ago so I waited about 2 weeks total.

    Upon initial testing, I'm definitely glad I got it. These are just some of my first impressions. I'm trying to put together a video review that's a little different than what's already been posted. I'll try to get that done as soon as I can.

    - well built overall; solid construction
    - easy to set up (attach feet, attach tripod head, adjust tension if needed, and you're ready to go)
    - smooth slider action (I was able to operate it with 1 finger with ease)
    - feet attach (fairly) easily
    - great carrying case (for the most part)
    - slim profile

    - was missing a washer on 1 of the feet (not a big deal overall but would be nice to not have missing parts)
    - had difficulty unscrewing one of the feet from the slider; took a few times to finally get it smooth
    - feet must be removed in order to fit into the bag
    - if you attach a tripod head (which I did using the 717AH) you won't be able to use the supplied carrying case

    For the last 'Con', I attached a Manfrotto 577 quick release base plate to the unit and a tripod plate to the bottom of the tripod head. That allows me to quickly remove the tripod head for transportation. I'm still fidgeting with this set up so I'll share an update once I get everything set.

    Hope that helps. And for those who bought one, enjoy! For those who may be on the fence, go for it!

  14. thuan

    Hi, Emm, how long did it take for your slider to arrive? I received a notice that mine was shipped so I'm just trying to figure out when it might arrive.

    Hey, Kepano, sorry to hear it wasn't able to be fixed but glad that Frank offered a replacement; good customer service is as important as quality 🙂

  15. UPDATE: Turns out the slider plate can't be field serviced. I was curious how I'd get the lower plate off the rail, thinking maybe I'd crank in/out the tension mechanism. The end caps are fixed, so you can't just run the slider off the end of the rail. So, Frank has offered to send me a new slider. Don't know if he's sending me the whole kit or just the rail/slider (sans feet/tools/bag).

    I'll let you all know if/when I get it. Like I said earlier, Frank has been responsive by email, so I'm optimistic. Hope they're not too backlogged...

  16. thuan

    hey, kepano, thanks for the heads up. i'm hoping this isn't a common issue. if other folks who ordered one can share, that'd be cool. i'll do same once i receive mine.

  17. Hey folks, I jumped on this deal when Emm originally posted it, and it finally got to me. Unfortunately, the screws that hold the top plate to the bearing sled were stripped, one severely. So, I can only put three of the four hex screws back in (and those three were kind of rough). The remaining hole was too badly stripped to let me put the screw back in.

    I contacted the seller (Frank) about the problem and he has thus far been responsive to my complaint by email, but we haven't yet gotten to a resolution. His engineer asked if I'd accept replacement screws, which I declined. Maybe the slider isn't a user serviceable part?

    I also found the slider to be rough at first, but it smoothed out after a break-in period.

    Anyhow, I thought the Cheesycam community might want to know before buying. I'm curious if any one else has had any problems. I'll post an update as this issue evolves. No matter how good a deal, it's not worth much if it doesn't work as expected. I hope to get my slider fixed soon.


  18. Emm

    Post author

    @Sigmund - You can only take them out. You can't fold them. You can find everything you need here: httpss://cheesycam.com/slider-tips-and-mounting-solutions/

  19. emm what is the fluid head and where can I buy it?
    also, the feet, the length is about a foot, can you fold them?or the only option is to take them out?

  20. Second test with the Konova: https://www.vimeo.com/19061081

    Interesting to see that it was not as much the fact that the slider was mounted on 1 tripod, that cause the camera shake at the tele end, but the fact that the camera and tripod head are sitting on relatively narrow rails. It might get better if you mount directly on the carriage, ie foregoing the tripod head, at the expense of losing composition options.

  21. John

    Thank you, Emm! Got mine today and it is indeed a great slider. However, I don't find these 2 props/adjustable legs in the package. Did anyone else have the same issue? I just emailed them about this...


  22. Emm

    Post author

    @John Johansson - if you've ever used those $1200 dollar sliders, they make even more noise than his one. You just have to have some experience with other roller bearing sliders to appreciate the price point.

  23. I just ordered one. But I'm worried about the sound it makes. Do you think it's possible to dampened the noise level? Change the roller bearings?

    What length is the best length. Will a 1 m (39 inch) be too bulky to travel with? Will the tripod hold the slider when it reaches the ends?

  24. Emm

    Post author

    @PT - There's plenty of mounting points for a motor. Just gotta find the right setup. For sure the Rotisserie motor for slow Timelapse pans would work great. When moving it slowly, there's not 'as much' noise but there's obvious noise in every slider including IGUS dry stuff.

  25. PT

    Hi Emm,

    Do you see any (easy) way of installing a motor to this slider?
    I'm about to get one, but first would like to make sure that this will be possible.
    Also on you movie, you moved the camera quickly, which created the noise, but in fact the usual way during filming is to move it slowly. Do you hear anything when moving it slowly left/right?

  26. Emm

    Post author

    @Zach - Yeah it's perfect. I have another on the way too. I ordered two long before I posted it on my site..LOL.

  27. Emm

    Post author

    @Dan - I could try it with an EX-1. Let me see if I can hook up with my buddy and test it. I'm sure it can though..

  28. Dan

    What kind of weight do you think this slider will support? It mentions DSLRs in its description but do you think it is capable of handling larger video cameras like the Sony EX-1 or EX-3?

  29. Emm

    Post author

    @Zach - $275. Supply and demand, but still a great price. They are also adding an extra bearing to the new design, which might account for it.

  30. jason

    Curious, why worry about noise? If your shooting an event you'd likely dub audio over what the camera records and if your shooting a sit down interview wouldn't you have a separate audio system?

    I shoot weddings among other things and my 4' slider is way too long. I never use the whole length and it's always clumsy to use. 80cm seems perfect.

    I mount a 577 receiver plate directly to the all my sticks, that way you don't have to worry about the camera losing level when you reach one of the slider ends (when using one center tripod). I also mount a 501 plate to the bottom of all my manfrotto heads. ultimate flexibility!

  31. Pingback:

    Slider Tips and Mounting Solutions – Going Vertical » CheesyCam

  32. Emm

    Post author

    @J Hanna - Yes sometimes there is ball mount, and regular 3/8" mount. I just added a new post with everything you should need for a great sliding experience...

  33. Random question...for the tripod head... is there a difference between the 717ah, 717, and 717b...?
    I can't tell if they are just different names for the same thing from different sellers or if they are different models.

  34. Emm

    Post author

    @Express35 - Yeah there's always a trade off. It's not distractingly noisey, but there is noise from the rollers.

  35. Express35.com

    Is it quiet?

    I've tested some rails that were bearing based and they have all been noisy due to the metal/metal during slides.

    There is a reason why Kessler went to a polyurethane method...dead silent.


  36. YKL

    Thanks for sharing that with us. This is an excellent video gear site 🙂

    Is there any place where we can see some of your video work?

  37. Aberz

    Can't wait to see your crazy set up with different mounting position/angle.

    Some test footage would be awesome.

    These people should send you free products for preview

    Huge thanks !

  38. Craig

    Oooh, just ordered. I used an igus slider last weekend and while it worked great it was hard to keep smooth consistent slides. This looks like it will handle some awesome smooth motion slides.

  39. Emm

    Post author

    @Herb - I like the smaller units to travel with. If it's too long, it's awkward to pack up and might be too long for one single tripod to manage.

  40. Emm

    Post author

    @Jeff - I didn't make it out to Irish Bank. They were there though. I opted for the shorter slider. Mainly because when it's too long, it's a pain to travel with. This is a good length.

  41. Emm

    Post author

    @Vincent - I'm sure i'll be looking into some type of motor to add. Even a tiny one can pull it across the slider.

  42. spaceflows

    @Chris Wilmshurst - I'm in the same boat (purchased on the 10th but no indication of shipping). But I recall the gini rig delivery being the same sort of unsure, though ultimately very satisfying and quick delivery experience. Sounds like folks are starting to get theirs so I think we're in for something good!

  43. Jeff

    I bought the 100mm version and just received an email that they are sending me the 4 bearing one. I will keep you posted. BTW I went to the NorCal meetup at Irish Bank Friday all the way from East Bay and couldn't find anyone. I asked the bouncer and several groups and all looked at me like I was smoking something. Hopefully we can make a Bay Area Filmmakers Meetup group and meet somewhere quiet. Maybe next time.

  44. Herb


    Did you get the 80cm? I realized they offered longer after I ordered. They want $50 to upgrade from 80cm to 100cm. Opinion?

  45. Emm

    Post author

    @beeber - Yeah I threw mine on first thing. Totally rocks, and better than small tripod heads that jiggle.

  46. Emm

    Post author

    @Chris Wilmshurst - No tracking, just showed up. But showed up fairly quick I might add. They are a legit company and if you ordered on eBay like I keep suggesting, nothing to worry about.

  47. spaceflows

    Wow! This looks fantastic! I can't wait for mine to arrive and start playing. Thanks Emm, for your blog and allowing me the opportunity to get in on this $$-friendly slider dream! (I am obviously just slightly excited).

  48. Chris Wilmshurst

    Did you get a tracking number as I have no been given one and I'm it hasn't been marked as posted. (I purchased on the 10th)

  49. beeber


    the Weifeng fluid head that you turned us on to ... it works perfect on top of this baby.


Comments are closed.