Tag Archives: came-mini

• 36 Comments

•

Here's a quick overview video of the new CAME-TV Mini 3. This is the third version of this little gimbal. The first CAME-MINI required tools to balance your camera, while the MINI-2 was very similar in build to the original version with the exception of tool-less adjustments. The new MINI-3 Gimbal has been completely redesigned, but keep note that it is still geared towards carrying a similar sized camera and payload as the other CAME-MINI systems.

The most important performance difference is this new model finally has Encoder Hardware built in. Encoders have made a huge difference in how SBGC gimbals operate, and it's something I highly suggest looking for when shopping for one. You should have more stability as well as longer more efficient battery life.

The new top handle can be removed from the gimbal frame and sectioned into 3 pieces (similar to ARGO design). Since the battery is now mounted behind the camera (not inside the top handle like MINI/MINI2), the Mini-3 Gimbal frame can be used without the top handle. In fact CAME-TV is advertising a version that can be mounted under a Drone and comes with a special vibration mount adapter called the MINI-3-AIR (seen here).

CAME-MINI2-AIR Gimbal for Drones
Learn-More-sm CAME-MINI3 AIR Gimbal with Vibration Mount

Similar to CAME-TV's ARGO Gimbal, the CAME-MINI 3 comes with a wireless joystick, gimbal stand, Hardcase, Battery, Charger, Built in 5.8Ghz Wireless Video Transmitter (SD), and a few other accessories. Inverted mode is done by rotating the handles over the side (not over the top like Ronin). It should automatically detect the inversion, so there's no need to power the system Off and restarting the system inverted. This makes it much faster when changing your shots from low mode to eye level tracking shots.

CAME-TV CAME-MINI 3 Mini 3 gimbal encoders
Learn-More-sm CAME-TV CAME-MINI 3 Gimbal 32 Bit SBGC w/ Encoders

So for those who are wondering if this CAME-MINI 3 gimbal will be suitable for you, I would highly recommend you get familiar with the types of cameras and lens combinations people are having success with. You can see many of those examples of CAME-MINI gimbal videos submitted by customers (found here).

Related Articles You May Like:

• 54 Comments

•

Many times people complain about the horizon being offset, or possibly the camera's horizon may drift over time. This could easily be caused by the 'mode' or 'profile' the gimbal is currently working in, and not necessarily a problem with the gimbal itself. Understanding the profiles, how and when to use them is important if you want to achieve best results. Many of you may be surprised at how much the profiles can affect the results your getting with your gimbals.

This video covers the different profiles on the new tool-less CAME-MINI2 Gimbal, and how these different profiles can influence camera's position during operation. It also covers how to modify the service modes so that you can manage the gimbal and calibrate it without a computer connected. It also covers troubleshooting your Joystick RC Trim if you believe your camera position 'drifts' over time. Keep in mind, that these settings are not unique to this gimbal, but for any gimbal operating with the same SBGC software.

So the next time you're running around operating your gimbal, and things may not appear level or squared up, think about what mode you're working in. Your gimbal may just be following directions, and not necessarily out of calibration. Profile 2 seems to be a good fit for tracking subjects and setting your Joystick to control 'only tilt' will help you manage your gimbal while keeping the horizon level. You can easily change the 'speed' of your joystick so that the camera movements will still appear smooth.

Also, take advantage of your Service Modes by using the Profile 4, Profile 5, and Long Press options. When you're out in the field make it a habit to square up your frame, level your camera, and calibrate your sensors (set a new home position). Unfortunately this video was probably very boring, but hopefully informative in some ways. If you have any questions, leave your comments below.

To find out more, visit the product page for the CAME-TV CAME-MINI2 Gimbal (HERE).

came-tv came-mini2 gimbal came mini gimbal cametv mini gimbal mini2 gimbal
find-price-button CAME-TV CAME-MINI2 (v2 Tool-Less) 3-Axis Mini Gimbal Stabilizer

Related Articles You May Like: