Glidecam

• 13 Comments

•

Big thanks to Mark H. for taking time out to make this video. Here Mark is showing us his DIY arm brace for his Flycam Nano stabilizer. The Flycam Nano is proving to be a very popular small stabilizer, but one thing to note is that even the handle comes in small. If you're not practicing some type of Shaolin Tiger Claw Death Grip (like myself), you might want to look into swapping the handle out with something a bit larger, or better yet work with an arm brace. If you don't know, the handle to the Flycam Nano is hollow and resembles the Glidecam stabilizers. With it's hollow designed handle, it can accept the same arm brace that is used with the Glidecam stabilizers. Of course that original brace (if you're lucky to find one) retails for about $150 dollars.

Mark takes a simple medical use wrist brace found in any local pharmacy and adds a custom DIY bracket to transfer most of the weight away from the wrist, allowing you to fly a bit longer, and possibly a bit steadier. For those with Steadicam Merlin's or Steadicam Jr's this idea will also work for transferring that weight over from your wrist. Mark also makes a good point to talk about how handy an arm brace is to have when you can't travel with a vest. As an owner of a vest myself, I can attest that it's a huge pain to travel with. It's also not very quick to get in an out of and is sometimes a bit dangerous when you're surrounded by fast moving kids. This would be the ideal situation in which you could take advantage of a solid arm brace.

[Thanks Mark]

For something like this, you'll probably want to go with the wrist braces that have a 'splint' like Mark's to attach a bracket.
wrist-brace-splint
Wrist Brace with Splint


• 1 Comment

•

After my recent posts on the Flycam Nano, there's been quite a lot of interest in budget stabilizers. Of course they aren't built as well as the Glidecam stabilizers, nor can they carry the amount of weight. If you've got a big camera, the Glidecam HD stabilizers are well worth the bucks. For those who are on a budget and want something larger than the Flycam Nano, you can always find some good deals on some used Glidecam Pro systems. There is usually 2000's and even 4000 Pro models available and sure does beat paying full price.


glidecam-ebay
find-price-button eBay Auctions on Glidecam Stabilizers

• 4 Comments

•

You think you've got it tough when balancing your Glidecam at home? Well, you might be thinking differently after seeing this next video. Having just received the Glidecam HD1000 without testing things out, Adam was out in Africa and needed a bit more help getting things fine tuned. Talk about DIY and ingenuity, these guys took their time to make something look OEM, instead of just duct taping some random weights. Very cool video from Vimeo member Adam, thanks for sharing.

• 116 Comments

•

Ok, just to say I tried, here's a video trying to explain what I do to balance a stabilizer like the Glidecam or Flycam. This is one video I never wanted to do, because there are so many good ones already on the web. If you can find the videos on how to balance a Glidecam, that's pretty much the same thing for the Flycam. There is one thing those other videos don't talk about, and you'll hear me stress this several several times in the video. This most worthy tip comes in after 5:20 when I talk about moving the sled slightly upwards to reduce that awful rocking motion while you walk. The biggest problem with people trying to balance stabilizers is that they believe they need to really load up on the bottom weight to get the camera to stand upright. That's not true at all. You'll notice I begin to dial things in when my stabilizer is slightly at an angle. Once the stabilizer is at an angle, DO NOT ADD MORE WEIGHTS! Start adjusting the top stage to center the camera. If you can't seem to balance the camera by moving it on the stage, remember that the bottom weights can also be shifted back and forth to get the camera to stick upright.

Ok, now that the camera is upright and you think you have it ready to fly, check to see if it starts swaying. If the stabilizer is swaying side to side (like a boat in the ocean), then move the sled just millimeters upwards. Try try again and do it by just millimeters at a time. For the Steadicam Merlin - you will need to adjust the 'arch'. If you own one, you'll know what i'm talking about. The Arch is similar to the Glidecam Sled. Lower it and you'll be making it more bottom heavy. Close the Arch and you'll make it 'less bottom heavy'. For the Steadicam Merlin and Steadicam JR, you can also 'unthread' the Gimbal Handle. This is a design that Steadicam uses to change the center balance ever so slightly by unscrewing the handle. Balancing stabilizers takes patience and practice. Of course a few prayers and a three wolf moon shirt might help you get there faster.

• 24 Comments

•

I posted an article about my Steadicam JR auction and there was definitely some interest in that item. I also posted about a single Hollywood VS1 stabilizer that went up for auction, and somebody was lucky to grab it by the next day. Looks like lightweight stabilizers are still in demand. After posting an article and a video review from Vimeo member Kaydawgy about the Flycam Nano video camera stabilizer, those little units have been very popular as well.

Periodically I'll get comments and emails asking about where to find the Flycam Nano lightweight video stabilizers when they are sold out, so right now a few of them have shown back up on auctions. If you've missed out on the other lightweight stabilizers i've been posting about, check out the Flycam Nano stabilizers while they're around.

flycam-nano-video-stabilizer
find-price-button Flycam Nano DSLR Video Camera Stabilizer

• 8 Comments

•

Many of you have probably already seen this video. It was posted up over a year ago as Part 1 of 2. I know i've had my eyes on it for quite a while waiting for the follow up, but Part #2 of this project doesn't look like it will happen anytime soon. This one is based on the Gimbal Handle that is used on the Glidecam series stabilizers. There seems to be a million ways to make a Steadicam Merlin gimbal handle, but little ways to make a decent Glidecam type gimbal handle. In this interesting video, there's some really nice techniques in mounting several bearings into some cheap PVC making it into a full 3 axis gimbal. It's been a year already, and there's some really good ideas in here to just let this sit back without being tackled by someone. Since video #2 hasn't been released to follow up on this, i'm curious if anyone has attempted this DIY project, and how far did you get?

If you're not familiar with what a Glidecam Stabilizer is capable of, check out my HD1000 video demonstration here: http://cheesycam.com/glidecam-hd1000-dslr-video-stabilizer-demonstration/

glidecam-hd-1000
click image for pricing on Glidecam HD1000 Stabilizer System

• 38 Comments

•

Wait! Just gotta say sorry about the mess, I just bought the place and still moving crap in. Boxes everywhere, don't know where to put anything yet. Hey you're lucky i'm even sharing this test video, it's almost Midnight! Yeah and it might be a bit dark too, I wasn't going for quality here, just trying to get this darn thing balanced. So I have an early music video shoot tomorrow in which I thought I would do ALL Canon 60D's so I can break her in and get faster at the menu and settings. There will be three Canon 60D's on set. I didn't have the Glidecam HD1000 Stabilizer here, so I had to balance the Glidecam HD4000 Stabilizer. (always balance your rig the night before, saves time).

60d-flying-4

The 60D doesn't have the Canon Battery Grip BG-E9 just yet, and i'm shooting with the the Canon EF-S 10-22mm f/3.5-4.5 USM SLR Lens. BTW, I'm loving that lens. Not much fisheye/barrel distortion as I thought it would have. The entire unit is just way too light for a beast like the Glidecam HD4000 Stabilizer. So in order to correct this, I placed weights above the camera on the hot shoe.

60d-flying-1

Yes, you can add weights under the camera, but the hot shoe was a simple way to add or remove weights, keep things almost centered with the camera weight, and also easy to shift it around for additional fine tuning balance. It's a pretty cool setup actually which would work great with some stabilizers that lack fine tuning adjustments. You can add a simple flat bar to the hot shoe and shift it around to center that camera weight. So i'm very close to having it balanced, the rest can be done by moving the lower sled up or down to make it either bottom heavy or top heavy. Check out the video above, and the photos of how I added the weights to the camera with a threaded hot shoe mount. You can find those mounts in this article: http://cheesycam.com/mounting-zoom-h1-on-camera/ or find some below.

shoe-adapters-20
find-price-button variety of shoe mounts

60d-flying-2

glidecam-hd-4000
find-price-button Glidecam HD4000 Stabilizer

Related Articles:
http://cheesycam.com/glidecam-hd4000-bts-with-canon-60d-steadicam-vest/
http://cheesycam.com/3-canon-60ds-music-video/