Tag Archives: Carbon Fiber Slider

1 Comment

camera-slider-dolly-48-inch-slideways-angle-cameramounted-800w_d570614f-8be1-4efe-b8d6-372da38dab3d_480x480ProAm USA is offering up One FREE Slideways Pro 48" Carbon Fiber Slider 'Complete Kit', which includes a Tandem Leg Tripod, & Video Fluid Head. To enter, simply use the form below (USA & Canada Residents over 18 only). To increase your chances of being selected you can Submit an Entry Form Once a Day. Entries start today and run for the next two weeks, Good Luck!


I've reviewed the iFootage Shark Slider combined with the S1A1 Motion Control in the past (video review seen here). This time we're adding on the X2 Head that allows for Pan and Tilt of the camera. With this, you have a fully motorized advanced 3-Axis Motion Control System that allows for accurate movements and positioning for Time Lapse and also incredibly silent for real time video use. Here's a quick video on how to use this system for that popular Parallax Tracking effect often used on B-cam setups during interviews.

The X2 Motion Pan/Tilt Head can also be used without the Shark Slider. So if you want a simple 2-Axis Motion Control Timelapse system, just throw it directly onto a tripod. Or use it at the end of a jib as a wireless motorized PT Head.

iFootage X2 2-Axis Pan Tilt Motion Control
Learn-More-sm X2 Pan Tilt Motion Control

I personally have only dabbled in some of what this entire system offers, and it is capable of far more advanced functions that what I have shown. It's not the cheapest motion control system avialable, but it's incredibly accurate if you need to repeat shots, highly programmable, and best of all incredibly silent (important for those interviews). You can find more information about iFootage Motion Control Equipment over at CamotionLLC.com (found here).

iFootage Shark Slider with S1A1 and X2 Motion Control

Learn-More-sm iFootage Shark Slider with S1A1 and X2 Motion Control


Here's a look at the new S1A1 (single axis) Motion Control System that can be added to the iFootage Shark Slider and expand it's functionality. With the S1A1 Motion Control add-on you can now wireless control the movements of the Shark Slider and also program the system for advanced Time Lapse functions.

To keep this video somewhat short, I'm not going to show you instructions on how to program the S1A1 unit. Instead i'm just showing you some of the features and how it performs. Check out the video below.

At slow speeds the motor is near silent which means you can use it for live interviews without interfering with audio. If you're looking for that slider shot and work as with a minimal crew, the S1A1 can be programmed to 'loop' and will continuously travel back and forth. If you have specific points along the slider that it needs to travel, you can record your movements and play them back to repeat once, or loop infinitely.

For advanced timelapse the S1A1 can be peformed to do a slow crawl, or move at set intervals and exposure times. A wireless receiver can also be used to trigger your camera's shutter so that it is in sync with the S1A1 System and does not move during your exposure.

The menu is a bit confusing (at least it was for me), but once it's been explained, it's pretty easy to navigate. And because that instructional part of the video could be lengthy, i'll post up a separate video on how to enter those features in to the software. If you'd like to find out more about the Shark Slider and the new S1A1 Motion Control System, please visit Camotionllc.com (click here).

shark slider motion control motorizeds1a1
Learn-More-sm iFootage Shark Slider + S1A1 Motion Control System


Here's a closer look at the Dynamic Perception Stage One Motorized Slider along with the new AT2 Joystick for real time motion control. The standard bundle can be purchased non-motorized ready to use manually for any of your video productions - silent, smooth, and breaks down as small as 20" for travel.

If you feel the standard bundle isn't long enough, expanding to 6,8, or even 10 feet is easy with their seamless rail extension kits available in Aluminum or Carbon Fiber. Each extension kit includes a mid-span support, so you can provide proper support no matter how long your track becomes. If you're too lazy to add multiple sections of 20" rails together, they offer longer sections up to 60" each (obviously not as travel friendly).
Dynamic Perception Joystick Cheesycam Review Stage One Motorized SliderDynamic Perception Carbon Fiber Rail Kit Extension
Stage One Base Slider Bundle and Carbon Fiber Rail Extensions

When you're ready to take it to the next level, you can always upgrade along the way, or just start out with one of the Motorized Slider Bundles that include a highly programmable controller that can be expanded to control more than one motor for more advanced motion such as a pan/tilt head.
AT2 Controller Dynamic Perception Joystick Cheesycam Review Stage One Motorized Slider Bundle
Stage One Complete Motorized Slider Bundle

Like many motorized slider systems, when using the Stage One motion control during a live video shoot, noise will be apparent. The camera sits directly on a stage with the motor very close to the camera. Depending on the speed and motor you choose, the noise may be picked up even if your microphone is a small distance from the slider. Still you can always switch to manual mode by removing the drive belt and simply operating by hand which is very smooth and very silent.

When you need real time motion control operation, the new AT2 Joystick controller is the optional accessory to get. The AT2 Joystick also offers a cruise mode for hands-free operation. The AT2 easily lets you control direction and speed in real time.

AT2 Controller Dynamic Perception Joystick Cheesycam Review Stage One Motorized Sliderat2-3
AT2 Joystick Real Time Motion Controller