SlingStudio Wireless Portable Multi-Camera Production and Live Stream

SlingStudio is a new product recently announced at the NABShow. With the popularity of Multi-Camera Live Streaming videos growing over the past year, I find this is one of the most innovative products to drop in 2017.

With the SlingStudio you can take advantage of using (ios and Android) smartphones as inexpensive wireless cameras, or use any of your professional cameras by adding their CameraLink adapter. Here's an unboxing and general setup with the brand new SlingStudio.

How it works:
The SlingStudio Hub can work off of battery power, so it's truly portable. Once you power it on, it acts as a wireless access point. Install the SlingStudio Capture app on your smart device and connect to the SlingStudio Hub (wifi network). From an iPad with the SlingStudio Console app installed, you can view all of the different video being streamed from every device connected.

You can choose to record just the program feed locally on an SDXC card, or external USB drive as your switching camera angles, or you can record each of the feeds individually to edit later. There is also a dedicated Audio line in if you're working with a mixer or even a simple wireless mic system. If you have internet access at your location, you can choose to Broadcast Live to any of the popular social networks (Facebook, YouTube, etc).

There's a number of features any multi-camera live production would need such as graphic overlays, and various transitions. When working with a Smartphone and Capture app, there's even a Tally display that tells the operator when their camera angle is being used.

The most exciting part of SlingStudio for me is the completely wireless workflow - right down to the Hub running off battery power. Not only can you use accessible smart devices for a multi-camera production, but you can also add your professional camera systems.

I haven't had the chance to test SlingStudio in a long project yet, but there are a few things I could already advise. If you're planning on using a smartphone, use good hardware. The better the hardware, the smoother the video will stream back to the SlingStudio hub. And if you're planning on shooting for a short while, make sure you have a charger on hand. The Wifi connection and streaming video back to the hub consumes a fair amount of battery power.

There's also a small 2 second or so delay in the video feed when viewing from the iPad. This is not something to be concerned about if you're not outputting the display to a live audience in real time. People who are watching from a Live Stream on the internet are usually delayed 30-45 seconds by providers like Facebook and YouTube anyways. The delay is also not a problem if you're planning to just record all the streams to edit later.

I'm excited to try the new SlingStudio out on a few projects, but if you have any questions or comments now, let me know. I'll try to implement those answers on my next follow up video.

Or read more about the new SlingStudio (here):

SlingStudio Wireless Live Switch Live Stream Live Production
SlingStudio Multi-Cam Live Switch + Stream + Record

10 thoughts on “SlingStudio Wireless Portable Multi-Camera Production and Live Stream

  1. Post author

    @Ben - As long as it meets the supported resolution and framerate on the input, it will work. If you plan on doing live streaming, there's a good chance a client will ask you to input some type of device. What you need to have on hand is a Scaler/Converter as part of your kit. It's a life saver. You can basically take any HDMI or SDI input and cross convert it (HDMI TO SDI or vice versa), and also convert any framerate to a different framerate, and event change resolution. Like this: httpss://

  2. Ben

    Will this work with DVD player connected to cameralink (for wireless) or hard wired into the hub via hdmi. The documentation only mentions cameras/camcorders, but was wondering if it was compatible with the system if you wanted to have one video feed coming from a DVD player or cable box/receiver to mix into the production with other video feeds


  3. Post author

    @Frank G. - Try a different framerate. Don't use 24p. If you're using 24hz Cinema Mode, switch back to NTSC. Then choose 29.97. Also check your HDMI output and make sure you're forcing it down to 1080.

  4. Frank G.

    I'm unable to connect the CameraLink to my GH4. I'm just not getting any output, though my GH3 works just fine. What settings do you change, if any, to use your GH4 with the hub. Great site btw.

  5. Post author

    @Malaniw - Currently it only supports 30p/60p. (720 at 60fps). There is a message that pops up when you try to use a different framerate, and possibly this will be updated in a firmware later.

  6. MalaniW

    Can you please set you camera to 25p or 50p and check if it recognizes the signal. I live in a PAL country and would love to order this but Im waiting to see some reviews first and if this will actually work in my country. Thanks.

  7. arnaud

    Finally !
    I have been doing a few works on livestreams these past months and was wondering why there wasn't a product like this yet.

    Looking at the fonctionalities... there seems like there is something missing though...
    No way to connect a macbook pro via Ethernet, and use an OSX app to do the switching, aswell as use the ISO recordings for replays and broadcast pre-recorded videos (like OBS or Wirecast do).

    But if you only need to broadcast "raw live switching" then it is pretty good ! And very promising !
    What we are seeing with products like these and also with Newtek's NDI, is that with encoder/decoder getting cheaper, we'll soon see a product that saves us from SDI cables and large switcher !!

  8. Post author

    @Chris K. - When recording in 4K from a GH4/GH5, you can change the HDMI output to 1080p. So it will still work. One problem I ran into recently is that the SlingStudio doesn't work on 24p. You have to be shooting at 30/60p. But this is typical for broadcast and live stream as 24p is more for cinema.

  9. What happens if the GH4 is set to record in C4K or UHD? Does the CameraLink freak out or can it down-convert to 1080p? Same with the hub...

    I am thinking this might be a good option for remote monitoring during film production (say, on a crane, or when the director wants to watch)...Not surprised by the latency, as I'm sure it's compressing the heck out of the video.

    Still very cool tech, and hopefully will drive prices down for wireless video solutions. (Many of which are prohibitively expensive for a low-budget production.)

    Also would love to hear what you think of the wireless performance, esp. if you run many camera feeds simultaneously with the iPad controller.

Comments are closed.